NEWS CENTER

On September 23, 2024, Assoc. Prof. Dr. Sawekchai Tangaramvong (Associate Dean of Academics Affairs), Prof. Dr. Chalermchon Satirapod (Associate Dean of Research Affairs), Asst. Prof. Dr. Supattra Visessri (Assistant Dean of Research Affairs), Assoc. Prof. Dr. Soorathep Kheawhom (Head of Department of Chemical Engineering) Assoc. Prof. Dr. Chaodit Aswakul (Head of Department of Electrical Engineering) Assoc. Prof. Dr. Surapong Suwankawin (Department of Electrical Engineering) Asst. Prof. Dr. Suree Pumrin (Department of Electrical Engineering) and Asst. Prof. Dr. Saran Salakij (Department of Mechanical Engineering) from Chula Engineering welcomed representatives from College of Engineering, National Taiwan University of Science and Technology (NTUST), Prof. Ming-Jyh Chern (Dean, College of Engineering), Prof.Chen-Hao Wang (Vice Dean of Engineering), Prof.Yih-Lin Cheng (Vice Dean of Industry-Academia Innovation) and professor team at Suan Ruam Jai Meeting Room 2, Engineering Building 3, Faculty of Engineering, Chulalongkorn University. . In addition to the introduction of each organization, there was a discussion on future collaboration topics College of Engineering, National Taiwan University of Science and Technology (NTUST) and Chula Engineering.  

During September 23-24, 2024, the Electrical, Electronics, Computer, Telecommunications, and Information Technology Association of Thailand (ECTI Association), in collaboration with King Mongkut’s University of Technology Thonburi, hosted the 23rd International Symposium on Communications and Information Technologies (ISCIT 2024) at the Knowledge Exchange Building, King Mongkut’s University of Technology Thonburi, Bangkok, Thailand. The event attracted faculty members, researchers, students, and interested participants from various countries. . Following a selection process by a panel of esteemed judges, the research paper titled “Monitoring Industrial Zone Activities Through Wavelet Analysis of Air Quality Time Series Data” was awarded the Best Paper Award on September 24, 2024. The paper was co-authored by Assoc. Prof. Akira Kodaka, Ph.D. (Keio University, Japan, and affiliated researcher at the Department of Industrial Engineering, Faculty of Engineering, Chulalongkorn University), Assoc. Prof. Natt Leelawat, D.Eng. (Assistant Dean and Associate Professor of the Department of Industrial Engineering, Faculty of Engineering, Chulalongkorn University), and Prof. Naohiko Kohtake, Ph.D. (Keio University, Japan). . This collaborative research between Keio University and Chulalongkorn University investigates changes in atmospheric composition, specifically the concentrations of NO2 and PM2.5, using satellite data to compare with industrial activities. The findings aim to provide valuable data for Area-Business Continuity Management Systems.

On Friday, September 20, 2024, the Faculty of Engineering at Chulalongkorn University, through its Office of International Affairs, organized the “BKK One Day Tour” as part of the Welcome New Chula Engineering International Student Program for the first semester of the academic year 2024. . The tour aimed to provide international students with the opportunity to explore and understand the richness of Thai culture and history. The participants visited the Museum Siam, where they were introduced to the history of Thailand through interactive exhibitions that showcased artifacts, paintings, and audiovisual displays representing different eras of Thai history. . The students also visited Wat Pho (Wat Phra Chetuphon Wimonmangkalaram Ratchaworamahawihan), where they marveled at the Thai architectural beauty and studied stone inscriptions detailing historical events. This exploration gave them a deeper appreciation of Thai craftsmanship and cultural heritage. . Through the BKK One Day Tour, the international students gained valuable insights into Thailand’s rich traditions and history, fostering cultural understanding and helping them adapt to life in Thailand.  

On September 18, 2024, Assoc. Prof. Dr. Natt Leelawat (Assistant Dean for International Affairs) and Assoc. Prof. Dr. Charusluk Viphavakit (Assistant Dean of Academic Affairs) from Chula Engineering welcomed representatives from Singapore Institute of Technology, Mr. Dave Lim (Deputy Director Global Experience Division) and Mr. Desmond Koey (Senior Manager, Global Experience) at Suan Ruam Jai Meeting Room 2, Engineering Building 3, Faculty of Engineering, Chulalongkorn University. . In addition to the introduction of each organization, there was a discussion on Short course option for SIT students and collaboration topics between Singapore Institute of Technology and Chula Engineering.  

On Monday, September 16, 2024, the Faculty of Engineering at Chulalongkorn University, through the Administrative Affairs and International Relations division, organized a Thai Cooking Class as part of the Welcome New Chula Engineering International Student Program for the 1st semester of 2024. . The event aimed to introduce international students to the basics of Thai cooking through hands-on lessons, featuring popular dishes such as Som Tum Thai (Green Papaya Salad), Larb Gai (Spicy Minced Chicken Salad), and a traditional Thai dessert, Bua Loy. The students not only learned how to prepare these dishes but also had the opportunity to cook and taste their own creations. . The Thai Cooking Class served as more than just a culinary experience. It provided international students with an opportunity to immerse themselves in Thai culture while fostering cultural exchange through food, as students from various countries shared their own culinary traditions. . This event is part of Chula Engineering’s commitment to enhancing the international student experience by promoting cultural understanding and integration.  

The Faculty of Engineering, Chulalongkorn University, congratulates all new graduates on their success. To welcome you to your new role as Intania alumni, we invite you to register as members of the Chulalongkorn University Engineering Alumni (CUEA) and receive a special gift, the “Gear Bear.” . Event details: Graduation Day: October 3-4, 2024 Time: 12:00 PM – 4:00 PM Location: Intania Courtyard (Gear Courtyard) . Please note: Limited to one bear per person (limited stock) Must be collected in person on the day of the event . Steps to receive your souvenir: • Register as a member of the Chulalongkorn University Engineering Alumni (CUEA) via Line Official @IntaniaAlumni or the website: https://alumni.intania.com • Register for the event: “New Graduates Register to Receive Gear Bear Souvenir” • Collect your souvenir on the event day by presenting your ID card or phone number. #ChulaEngineering #วิศวจุฬา #Intania

You are invited to join the group photo session for bachelor’s, master’s, and doctoral graduates of the Faculty of Engineering, Chulalongkorn University, on the occasion of the Graduation Ceremony for the academic year 2023. . Date: Thursday, October 3, and Friday, October 4, 2024 Location: Chula Engineering sign at the Intania Courtyard (Gear Courtyard) . Special commemorative gift: “Gear Bear” on graduation day. For more details, visit https://www.facebook.com/ChulaEngineering  

On September 3, 2024, faculty members and students from the Fukuoka Institute of Technology in Japan, led by Assoc. Prof. Tomiya Kimura, Assoc. Prof. Jing Fu, and Assoc. Prof. Elis Kulla, visited the Department of Industrial Engineering at Chulalongkorn University’s Faculty of Engineering. The visit aimed to strengthen academic and research collaboration between the two institutions in the future. . The visitors were warmly welcomed by Assoc. Prof. Angsumalin Senjuntichai, D.Eng. (Department head), faculty members, and researchers. During the visit, knowledge and innovations were exchanged from three laboratories: 1. Automation Lab led by Asst. Prof. Poom Luangjamekorn 2. Disaster and Risk Management Information Systems Research Unit led by Assoc. Prof. Natt Leelawat, D.Eng. 3. Advanced Manufacturing Lab led by Prof. Somkiat Tangjitsitcharoen, D.Eng. . This visit provided an opportunity to exchange ideas on cutting-edge research and laid the foundation for future academic and research collaborations, which are expected to benefit both institutions in terms of research and academic development.  

Chulalongkorn University’s Faculty of Engineering proudly hosted the prestigious AerCap Scholarship Awards Ceremony on 5 September 2024. The event recognized ten outstanding aerospace engineering students for their academic excellence and promising futures in the aerospace industry. . The ceremony was graced by Mr. Joe Millar, Vice President and Head of Technical Asia Pacific at AerCap, alongside distinguished faculty members. Mr. Millar presented the scholarship certificates, a testament to AerCap’s unwavering commitment to nurturing the next generation of leaders in aviation. . Assoc. Prof. Dr. Witaya Wannasuphoprasit, Dean of Chula Engineering, expressed profound gratitude to AerCap, highlighting the long-standing partnership that began in 2021. He emphasized how this collaboration has significantly enriched the academic and professional trajectories of Chula’s students. The scholarship recipients also shared heartfelt thanks, emphasizing the life-changing impact of AerCap’s support. . The AerCap Scholarship is fully funded, covering all tuition and program fees until graduation. It also offers the students the opportunity to participate in an internship and research projects with AerCap. The AerCap Scholarship continues to play an instrumental role in empowering Chula Engineering students, enabling them to excel in their academic pursuits and contribute meaningfully to the aerospace industry. . Quote from the Dean: “We

On 22 August 2024, Dr. Aung Pyae, a lecturer in the ICE programs at the International School of Engineering, was honored with the Top Paper Award for the presentation titled “Design and Development of a User-Centric Mobile Application to Promote Sustainable Hydration and Reduce Single-Use Plastic Water Bottle Consumption: A Case Study of Chulalongkorn University.” at the 3rd NIC-NIDA Conference 2024. This research was conducted in collaboration with the Department of Environmental and Sustainable Engineering, Faculty of Engineering, Chulalongkorn University.