FACULTY

ทำเนียบ “ศักดิ์อินทาเนีย” : รองศาสตราจารย์ ดร.ศราวุธ ริมดุสิต

รองศาสตราจารย์ ดร.ศราวุธ ริมดุสิต นับเป็นตัวอย่างของบุคลากรที่อุทิศตนเพื่อการสร้างและเผยแพร่งานวิจัย รวมถึงการผลิตบัณฑิตที่มีคุณภาพมาอย่างต่อเนื่อง เป็นผู้มีความคิดสร้างสรรค์ในการวิจัยทำให้สามารถผลิตผลงานที่นำไปประยุกต์ใช้ได้จริง และนำไปจดสิทธิบัตรได้หลายผลงาน นอกจากนี้รองศาสตราจารย์ ดร.ศราวุธ ยังผลิตผลงานวิจัยคุณภาพที่สามารถตีพิมพ์และอ้างอิงในระดับนานาชาติอีกเป็นจำนวนมาก นับเป็นตัวอย่างของบุคลากรที่ทุ่มเทให้กับการทำงานอย่างแท้จริง สมควรเป็นแบบอย่างแก่บุคลากรท่านอื่นๆต่อไป

ตำแหน่ง       รองศาสตราจารย์ ระดับ 8
สังกัด            ภาควิชาวิศวกรรมเคมี
เริ่มปฏิบัติงานในคณะวิศวกรรมศาสตร์ เมื่อ  7 เมษายน พ.ศ. 2535
ประวัติการศึกษา
พ.ศ. 2535   วศ.บ. (วิศวกรรมเคมี) เกียรตินิยมอันดับสอง จุฬาลงกรณ์มหาวิทยาลัย
พ.ศ. 2540   M.S. (Macromolecular Science) Case Western Reserve University, USA
พ.ศ. 2543   Ph.D. (Macromolecular Science) Case Western Reserve University, USA

สิทธิบัตร
  • S. Rimdusit, P. Lorjai, and K. Sujiroj, “Ballistic Armor Composites from Ballistic Fibers and PC/ABS Matrices,” Thailand Patent pending issue number 0701004915(2007).
  • S. Rimdusit, and C. Jubsilp, “Polymer from Anhydride-Modified Polybenzoxazine,” Thailand Patent pending, (2007).
  • S. Rimdusit, K. Kamonchaivanich, and T. Bunprasert, “Skin Protective Materials from Silicone Polymer,” Thailand Patent pending (2007).
  • S. Rimdusit, S. Pathomsap, and T. Mongkolsri, “Composite Armor from Polybenzoxazine-Urethane Alloys and Ballistic Fibers,” Thailand Patent pending, issue number 0601004554 (2006).
  • S. Rimdusit, K. Kamonchaivanich, S. Ratchukul, and C., “Breast Model from Modified Silicone Elastomer,” Thailand Patent pending, issue number 097254 (2005).
  • H. Ishida and S. Rimdusit, “Ternary Systems of Benzoxazine, Epoxy, and Phenolic Resins,” U.S. Patent 6,207,786 (2001) [S. Rimdusit Ph.D. Dissertation].
  • H. Ishida, “Composition for forming high thermal conductivity polybenzoxazine-based material and method,” US Patent 5,900,447 (1999) [S. Rimdusit M.S. Thesis].
ผลงานตีพิมพ์ระดับนานาชาติ
  • C. Jubsilp, T. Takeichi, S. Rimdusit, “Curing kinetics of Benzoxazine–Epoxy Novolac Copolymer Investigated by Non-isothermal Differential Scanning Calorimetry,” accepted to Polym. Degrad. Stab. (2010).
  • S. Rimdusit, C. Liengvachiranon, and S. Tiptipakorn, “Thermomechanical Characteristics of Benzoxazine-Urethane Polymer Alloys and Their Carbon Fiber-Reinforced Composites,” J. Appl. Polym. Sci.,113, 3823 (2009).
  • C. Jubsilp, T. Takeichi, S. Hiziroglu, and S. Rimdusit, “Effect of Resin Composition on Microwave Processing and Thermophysical Properties of Benzoxazine-Epoxy-Phenolic Ternary Systems Filled with Silicon Carbide (SiC) Whisker,” Polym. Eng. Sci., 49, 1022 (2009).
  • S. Rimdusit, P. Jongvisuttisun, C. Jubsilp, and W. Tanthapanichakoon, “Highly Processable Ternary Systems Based on Benzoxazine, Epoxy, and Phenolic Resins for Carbon Fiber Composite Processing,” J. Appl. Polym. Sci., 111, 1225 (2009).
  • S. Rimdusit, T. Mongkhonsri, P. Kamonchaivanich, K. Sujirote, and S. Tiptipakorn, “Effects of Polyol Molecular Weight on Properties of Benzoxazine-Urethane Polymer Alloys,” Polym. Eng. Sci., 48, 2238 (2008).
  • C. Jubsilp, T. Takeichi, S. Hiziroglu, and S. Rimdusit, “High Performance Wood Composites Based on Benzoxazine-Epoxy Alloys,” Bioresource Technol, 99, 8880 (2008).
  • S. Tiptipakorn, P. Lorjai, S. Ando, T. Takeichi, and S. Rimdusit, “Surface Segregation-typed Polyimide Blends between Silicon-containing Polyimide and Polyimides of Varied Chain Flexibility,” Synth. React. Inorg.Met.-Org. Nano-Metal Chem., 38, 1 (2008).
  • S. Rimdusit, S. Jingjid, S. Damrongsakkul, S. Tiptipakorn, T. Takeichi, “Biodegradability and Property Characterizations of Methyl Cellulose: Effect of Nanocompositing and Chemical Crosslinking.” Carbohydrate Polymers, 72, 444-455 (2008).
  • S. Tiptipakorn, S. Damrongsakkul, S. Ando, K. Hemvichian, and S. Rimdusit, “Thermal Degradation Behaviors of Polybenzoxazine and Silicon-containing Polyimide Blends,” Polym. Degrad. Stab., 92, 1265-1278 (2007).
  • S. Rimdusit, V. Jiraprawatthagool, C. Jubsilp, S. Tiptipakorn, and T. Kitano, “Effect of SiC Whisker on Benzoxazine-Epoxy-Phenolic Ternary Systems: Microwave Curing and Thermomechanical Characteristics,” J. Appl. Polym. Sci., 105, 1968-1977 (2007).
  • C. Jubsilp, T. Takeichi, and S. Rimdusit, “Effect of Novel Benzoxazine Reactive Diluent on Processability and Thermomechanical Characteristics of Bi-functional Polybenzoxazine,” J. Appl. Polym. Sci., 104, 2928-2938 (2007).
  • S. Rimdusit, W. Benjapan, S. Assabumrungrat, T. Takeichi, and R. Yokota, “Surface Segregation of Siloxane Containing Component in Polysiloxane-Block-Polyimide and s-BPDA/ODA Polyimide Blends,” Polym. Eng. Sci., 47, 489-498 (2007).
  • S. Rimdusit, V. Jiraprawatthagool, S. Tiptipakorn, T. Kitano, and S. Covavisaruch, “Characterization of SiC whisker-filled polybenzoxazine cured by microwave radiation and heat,” Int. J. Polym. Anal. Ch., 11, 441-453 (2006).
  • S. Rimdusit, N. Kampangsaeree, W. Tanthapanichakoon, T. Takeichi, and N. Suppakarn, “Development of wood-substituted composites from highly filled polybenzoxazine-phenolic novolac alloys,” Polym. Eng. Sci., 47, 140-149, (2007).
  • C. Jubsilp, S. Damrongsakkul, T. Takeichi, and S. Rimdusit, “Curing kinetics of arylamine-based polyfunctional benzoxazine resins by dynamic differential scanning calorimetry,” Themochim. Acta, 447, 131 (2006).
  • S. Rimdusit, W. Tanthapanichakoon, and C. Jubsilp, High performance wood composites from highly filled polybenzoxazine,” J. Appl. Polym. Sci., 99, 1240 (2006).
  • H. Takeshita, T. Shiomi, T. Suzuki, T. Sato, M. Miya, K. Takenaka, S. Wacharawichanant, S. Damrongsakkul, S. Rimdusit, S. Thongyai, V. Taepaisitphongse, “Miscibility in Blends of Linear and Branched Poly(ethylene oxide) with Methacrylate Derivative Random Copolymers and Estimation of Segmental  Parameters,” Polymer, 46, 11463 (2005).
  • S. Rimdusit, S. Pirstpindvong, W. Tanthapanichakoon, and S. Damrongsakkul, “Toughening of polybenzoxazine by alloying with urethane prepolymer and flexible epoxy: A comparative study,” Polym. Engr. Sci., 45, 288 (2005).
  • T. Takeichi, Y. Guo, and S. Rimdusit, “Performance improvement of polybenzoxazine by alloying with polyimide: effect of preparation method on the properties,” Polymer, 46, 4909 (2005).
  • S. Rimdusit and R. Yokota, “Atomic Oxygen Protections in Polymeric Systems: A Review,” The Journal of Space Technology and Science, 18, 34 (2002).
  • S. Rimdusit and H. Ishida, “Gelation Study of High Processability, and High Reliability Ternary Systems Based on Benzoxazine, Epoxy, and Phenolic Resins for an Application as Electronic Packaging Materials,” Rhelo. Acta., 41, 1 (2002).
  • S. Rimdusit and H. Ishida, “Synergism and Multiple Mechanical Relaxations Observed in Ternary Systems Based on Benzoxazine, Epoxy, and Phenolic Resins,” J. Polym. Sci. Polym. Phys. Ed., 38, 1687 (2000).
  • S. Rimdusit and H. Ishida, “Development of new class of electronic packaging materials based on ternary systems of benzoxazine, epoxy, and phenolic resins,” Polymer, 41, 7941, (2000).
  • H. Ishida, and S. Rimdusit, “Heat Capacity Measurement of Boron Nitride-filled Polybenzoxazine: A Composite Structure Insensitive Properties,” J. Thermal. Anal., 58, 497 (1999).
  • H. Ishida, and S. Rimdusit, “Very High Thermal Conductivity Obtained by Boron Nitride-filled Polybenzoxazine,” Thermochim. Acta, 320, 177 (1998).
รางวัลที่เคยได้รับ

รางวัลโครงการวิจัยเด่น สกว. ประจำปี 2552

เคล็ดลับความสำเร็จ

มีอิสระทางความคิด และมุ่งมั่นในการสร้างคนดีมีคุณภาพออกไปเป็นกำลังของประเทศ

ความนัยจากใจ รู้สึกภูมิใจอย่างมากที่ได้รับรางวัลอันทรงเกียรตินี้จากคณะวิศวกรรมศาสตร์ และจะไม่ลดละในการทำประโยชน์ให้แก่คณะและส่วนรวมอย่างเต็มความสามารถ